Tools

Tools 

There are 76 products.
0 Review(s)

This tool was designed to cut strips of clay in similar or different widths.WARNING: Blades are very sharp; wear finger or hand protection and handle them with care.

CAD$19.95
In Stock
0 Review(s)

Large 400 grit sanding sponge. It can be used for all metals. Each sponge measures 11.5 cm x 14 cm (4-1/2” x 5-1/2”). 

CAD$4.50
In Stock
0 Review(s)

Large 600 grit sanding sponge. It can be used for all metals. Each sponge measures 11.5 cm x 14 cm (4-1/2” x 5-1/2”). 

CAD$4.50
In Stock
0 Review(s)

Large 1000 grit sanding sponge. It can be used for all metals. Each sponge measures 11.5 cm x 14 cm (4-1/2” x 5-1/2”). 

CAD$4.50
In Stock
0 Review(s)

Large 1500 grit sanding sponge. It can be used for all metals. Each sponge measures 11.5 cm x 14 cm (4-1/2” x 5-1/2”).

CAD$4.50
In Stock
0 Review(s)

This set of 4 large sanding sponges includes one of each 400, 600, 1000 and 1500 grits. The size of each sponge is 11.5cm X 14cm (4-1/2¨ x 5-1/2 ¨).

CAD$15.50
In Stock
0 Review(s)

The Blender pen is a solvent-based, colourless felt pen, used for creating image transfers to various surfaces such as wood, cardboard, stones, paper, certain fabrics and more. It is also useful for blending colours in solvent-based coloured inks.

CAD$12.95
In Stock
0 Review(s)

Mandrels kit is used to make perfect rings from metal clays.This kit uses the North-American ring sizing chart and is made out of hardwood by a Canadian artisan.O' ring and cup warmer not included.

CAD$149.50
In Stock
0 Review(s)

The set of 8 o’rings is a valuable addition to the ring mandrels set. It enables you to secure the non-stick paper or plastic to the mandrels as well as forming a stopper for the ring to lean against.You must ensure that it is installed perpendicular to the mandrel for the ring to be levelled.

CAD$7.85
In Stock
0 Review(s)

This set includes 4 small sanding sponges of each 400, 600, 1000 and 1500 grits.  The size of each sponge is 6.5 cm x 7 cm (2 ¾¨ x 2¨)

CAD$4.50
In Stock
0 Review(s)

The mold includes 5 parts and is used to create quickly and simply a professional looking angled bail. This bail builder works with all metal clays and powders: however, you must consider the shrinkage rate of different clays when using it. Each mold contains 5 parts including a drill bit. Sold individually.

CAD$38.99
In Stock
0 Review(s)

To change the look of your bail, to a straight bail, use this insert, with the bail builder kit.Sold separately. Consult this product for more information on the basic kit.

CAD$12.99
In Stock
0 Review(s)

To change the look of your bail, to a straight bail, use this insert, with the bail builder kit.Sold separately. Consult this product for more information on the basic kit.

CAD$12.99
In Stock
0 Review(s)

This brush, of professional quality, is used in the 23 K gold leaf and metallic flakes gilding technique. It is used to delicately apply the leaf to the gilding adhesive.

CAD$6.50
In Stock
0 Review(s)

This brush, of professional quality,  is used in the 23 K gold gilding technique with gold leaves or metallic flakes. 

CAD$8.00
In Stock
0 Review(s)

This brush, of professional quality, is used in the 23 K gold leaf and metallic flakes gilding technique. It is used to manipulate the gold leaf or metallic flakes applied to the gilding adhesive.

CAD$4.00
In Stock
0 Review(s)

Hole punch made of steel. 7cm x 2cm x 1cm  (2 ¾¨ x ¾¨ x 3/8¨). Use with copper, zinc alloy, aluminum, silver, gold, brass, bronze and tin. Sold individually.

CAD$22.00
In Stock
0 Review(s)

This tool is a convenient hand-held torch for the jewelry maker, ideal for firing metal clays, making jewelry repairs, braising and metal patina. Flame temperature : about 1490C (2700F) Sold individually - butane gas canister not included. Never use propane gas.

CAD$68.99
In Stock
0 Review(s)

The rolls are made of aluminum oxide abrasive paper wrapped around a 2.4 mm (3/32") steel mandrel. A must have tool to facilitate sanding inside of closed rings or other surfaces. Sold in a package of 4 rolls. Available in 240, 320, 400, 600, 800, 1000 grits.

CAD$9.96
In Stock
0 Review(s)

Very popular ceramic soldering block that contains hundreds of tiny holes which accelerate and even out heat transfer while torch firing.Withstands heat up to 3,000°F. (1650C) Dimensions : 5-1/2" x 7-3/4" (14cm X 20cm)

CAD$19.99
In Stock
0 Review(s)

Rectangle tray made of plastic with 2 funnel tubes with twist-off caps. Facilitates the collection of sanding dust. 21 ½ cm x 16 cm (8 ½¨ x 6 ¼ ) Sold individually  

CAD$6.25
In Stock
0 Review(s)

These brushes, of professional quality, are used in the 23 K gold leaf and metallic flakes gilding technique. The set comes with three brushes: one flat, one cat’s tongue and one blending.

CAD$17.00
In Stock
0 Review(s)

The set, of aluminium oxide abrasive paper, includes one of each roll: 240, 320, 400, 600, 800 and 1000 grits. These are a must have tool to facilitate sanding the inside of closed rings or other surfaces. Sold in a set of 6 rolls.

CAD$14.85
In Stock
0 Review(s)

Agate tipped burnisher with bamboo handle. Use to create a high shine on finished silver and to attach gold foil to heated silver.

CAD$9.99
In Stock
0 Review(s)

Graduated Slat Set - This set contains one pair of six different gauge plastic slats. Now you can roll our your clay to the desired thickness without a second guess.

CAD$21.50
In Stock
0 Review(s)

Set of 5 modeling tools with plastic handle, metal point and silicone tip.

CAD$18.99
In Stock
0 Review(s)

With this engraving tip you can engrave on pretty much anything you can fit under the rollers in the Cricut Explore and the Silhouette. Simply add the engraving tip where you would normally put your pens, and engrave anything you would normally cut.

CAD$32.50
In Stock
0 Review(s)

Professionnal and resistant agate tipped burnisher with bamboo handle. Use to create a high shine on finished silver and to attach gold foil to heated silver.

CAD$22.99
In Stock
0 Review(s)

Set of three water brush with synthetic bristle and a water tank. Set included 3 sizes : fine – medium - large

CAD$22.50
In Stock
0 Review(s)

Perfect for travelling or at school, this tube expands to adjust to the objects that we store in. Made of plastic. Size: 8.5 to 14 inches (minimum and maximum) Diameter : 2 inches *Accessories not included.

CAD$8.50
In Stock
0 Review(s)

MINI SPRAY BOTTLE - 77 ml (2.6 oz) Set of 2 bottles, mini spray with clear plastic bottle with spray cap . Perfect for gently spray your clay powders, your inks and your dyes. 101.06 mm (4’’) height x 38.10 (1 ½’’) diamater.

CAD$2.99
In Stock
0 Review(s)

For optimum protection of your work surfaces.   This mat helps you to extend the life of your cutting tools and cutting indefinitely without damaging your work surface. The board self healing cut is the perfect cut surface for all your projects.This surface provides protection for the top of the table. Dimensions : 45cm X 30 cm X 2cm (17,75" X 11,80" ,12")

CAD$12.99
In Stock
0 Review(s)

Flexible Stainless Steel scraper. Can be used to cut and trim wet Metal Clay during the creation process. Approx. 10 cm (4") long

CAD$4.50
In Stock
0 Review(s)

Individual metal ring gauges in half sizes (US sizes 1-15). Use these ring gauges to determine the proper ring size of a finger.

CAD$28.95
In Stock
0 Review(s)

Short bristle Stainless Steel brush.  Used to finish fired pieces. Fits inside of rings.

CAD$18.99
In Stock
0 Review(s)

This mug warmer is ideal to dry your metal clays.  We recommend to use a small tile of ceramic or glass not to reach the maximum heat which could, in certain cases, damage certain components of your clay.

CAD$15.99
In Stock
0 Review(s)

Anti-Stick Spray for Metal Clay Releases clay cleanly from almost any object.

CAD$21.95
In Stock
0 Review(s)

Compressed vermiculite fiber brick. Heat resistent to 2400° F. Great for torch firing. (4"x6"x1.5")

CAD$10.00
In Stock
0 Review(s)

Kit of 10 files - 140 mm

CAD$9.99
In Stock
0 Review(s)

Calibration:Auto Calibration Maximum 500g. Unit 0.1g Auto off: 60sec Powered by: 2 X 1.5V 3AAA batteries ( Not included )

CAD$15.99
In Stock
0 Review(s)

4"x4" non-stick surface. Can be placed in drier, but not kiln. Reusable

CAD$1.50
In Stock
0 Review(s)

4 pieces per packet. One time use only. Use with glass for a smooth back. Can be cut to shape. (5" X 5")

CAD$5.95
In Stock
0 Review(s)

Fiber blanket for supporting delicate pieces in the kiln. (5"x6"x1") Reusable. Wear mask when handling.

CAD$8.49
In Stock
0 Review(s)

Molding compound, silicone, 15 minutes. Sold per (2) 10-ounce jars.

CAD$43.98
In Stock
0 Review(s)

Perfect to emboss all your metal clays before firing

CAD$12.99
In Stock
0 Review(s)

The Ultimate Crafters Companion. Everything you will ever need for your card making and paper craft projects in one handy and portable carry case. It builds on the features of the award winning Top Score and Enveloper tools and is designed to take your crafting onto the next level by providing an array of crafting utilities at your finger tips.

CAD$59.99
In Stock
0 Review(s)

Quantity: 10 sets (including 33 pcs) FeaturesBrand New and high quality.Easy to clean and use.

CAD$19.99
In Stock
0 Review(s)

Emery paper, paper and wood, assorted colors, 1/0 to 6/0 grit, 6-inch cone with 5-3/4 x 3/4 inch cone handle. Sold per 7-piece set.

CAD$15.99
In Stock
0 Review(s)

4 sheets of 4"x4" non-stick surface and 1 of 1" X 5" for your mandrel. Can be placed in drier, but not kiln. Reusable

CAD$5.50
In Stock
0 Review(s)

To be used with the AT 040

CAD$12.99
In Stock
0 Review(s)

Kiln posts-1.75 x 1.75 x .5" Sold in pack of 4

CAD$18.99
In Stock
0 Review(s)

Can be placed in drier, but not kiln. Reusable

CAD$5.00
In Stock
0 Review(s)

Coal-based, acid-washed carbon for firing bronze, cooper, brass metal clay. Coal carbons create a patina on clay pieces as they are fired.

CAD$74.99
In Stock
0 Review(s)

100% brand new and high quality 10pcs carbide micro drill 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1, 1.2mm 

CAD$11.99
In Stock
0 Review(s)

Fiber wheel, steel and nylon, dark brown, medium, 1-3/4 inch with 3/32 inch mandrel diameter and 7/8 inch head. Sold per pkg of 5

CAD$8.95
In Stock
0 Review(s)

Magnifier 3 in 1

CAD$17.99
In Stock
0 Review(s)

Wire rounder, steel and white ash wood. Sold individually

CAD$16.99
In Stock
0 Review(s)

Texture hammer, EUROTOOL®, wood and steel, 9-1/2 inches with (9) 17mm interchangeable faces. Sold per 10-piece set.

CAD$65.99
In Stock
0 Review(s)

Rock and jewelry tumbler, Lortone, steel / plastic / rubber, blue and black, 9-1/2 x 5-3/4 x 5-3/4 inch with 5-1/2 x 4-1/2 inch single barrel. Sold individually.

CAD$149.50
In Stock
0 Review(s)

Stainless steel shot mix contains a rustproof combination of flattened ball, diagonal and pin shapes with a bright mirror finish.

CAD$49.99
In Stock
0 Review(s)

Create beautiful effects and precise holes with this tool.

CAD$2.50
In Stock
0 Review(s)

It features built in LED work light, battery charge indicator, spindle lock for accessory change and also included an universal chuck Genesis 7.2V Lithium-ion Cordless Rotary Tool is ideal for hobby and project uses: Cut, sand, carve, clean, and more. Lightweight and easy to use, with accessories for numbers of applications. This pistol grip for easy...

CAD$85.00
In Stock
0 Review(s)

Multi-Purpose Crafty Cutter w/Snap-Off Blades Retractable crafty cutter can be used to trim paper, cardboard, foam, thin plastic and much more. An essential for all crafters

CAD$2.00
In Stock
0 Review(s)

Fine and medium point needles. This multipurpose tool set is perfect for scrapbooking, card making, parchment work, scoring, folding and embossing.

CAD$2.00
In Stock
0 Review(s)

Kiln shelf, ceramic, white, 6 x 6 x 1/2 inch square. Sold individually

CAD$19.75
In Stock
0 Review(s)

Enjoy a delightfully smooth and bold writing experience with these Uni-ball Signo Broad gel pens. Perfect for scrapbooking and art projects, these pens will make your lettering and drawing stand out bright and clear. The white pens are highly opaque and show up well on both light and dark colored papers.

CAD$9.80
In Stock
0 Review(s)

The all NEW adjustable pen holder for the Silhouette, Silhouette SD, Portrait, Cameo, Cameo 2, Cameo 3, Curio, KNK Zing & the Wishblade.

CAD$32.00
In Stock
0 Review(s)

The all NEW adjustable marker holder for the Silhouette, Silhouette SD, Cameo, Portrait, Cameo, Cameo 2, Cameo 3, Curio, KNK Zing & the Wishblade. Use almost any marker in your machine to draw instead of cut your images.

CAD$32.00
In Stock
Showing 1 - 76 of 76 items